Maintainer suit: Difference between revisions

From Guild of Archivists
No edit summary
(Replaced most mentions of "E.V. suit" and "Environmental Verification Suit" with "Maintainer suit" - see talk page)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{stub}}
{{stub}}
{{needs-image}}
{{Infobox device
{{Infobox device
| name = Maintainer Suit
| image = Standard Maintainer Suit.jpg
| imagecaption = The standard Maintainer suit
}}
}}
The '''Environmental Verification (E.V.) Suit''', often referred to as a '''Maintainer's Suit''', was a special suit made from [[deretheni]] stone. It was designed to be impervious to anything an [[Age]] could potentially throw at the wearer. The suit was jet black, made of overlapping plates of the stone, and had an almost metallic, insect-like appearance.
The '''Maintainer suit''' was a special suit made from [[deretheni]] stone. It was designed to be impervious to anything an [[Age]] could potentially throw at the wearer. The suit was jet black, made of overlapping plates of the stone, and had an almost metallic, insect-like appearance.


In older models of the E.V. suit, tiny, "Stone-bound" [[Linking Book]]s were encased in the gloves of the suit, one linking to the Age, and another linking back to the linking chamber. They were separated from the wearer's hand by inert membranes. To activate the link, a small vial of gas was discharged into the glove, dissolving the membrane and bringing the person's hand in contact with the linking panel. A timer was placed in the vial for the linking book back to the linking chamber, allowing a time delay before the link back was activated automatically.
In older models of the Maintainer suit, tiny, "Stone-bound" [[Linking Book]]s were encased in the gloves of the suit, one linking to the Age, and another linking back to the linking chamber. They were separated from the wearer's hand by inert membranes. To activate the link, a small vial of gas was discharged into the glove, dissolving the membrane and bringing the person's hand in contact with the linking panel. A timer was placed in the vial for the linking book back to the linking chamber, allowing a time delay before the link back was activated automatically.


Sampling devices were arrayed around the outside of the suit to collect information on the atmosphere and examined it for signs of life. The suit was hermetically sealed in order to prevent any potential contagions or toxins from entering the suit and harming the wearer.
Sampling devices were arrayed around the outside of the suit to collect information on the atmosphere and examined it for signs of life. The suit was hermetically sealed in order to prevent any potential contagions or toxins from entering the suit and harming the wearer.


The [[Guild of Maintainers]] created 3 designs of E.V. suits:
The [[Guild of Maintainers]] created 3 designs of Maintainer suits:


The first was the heaviest, largest and thickest, designed to withstand extreme envinoments. The second was the "standard duty" suit. Both can be found in the yellow locker room on [[Gahreesen]]. Finally, the third is the lightest and thinnest, and stands in stark contrast to the first two suits. However, this one does not have Linking books inside the gloves, and uses them outside it instead.
The first (sometimes called an "Environmental Verification Suit"{{citation needed}}) was the heaviest, largest and thickest, designed to withstand extreme environments. The second was the "standard duty" suit. Both can be found in the yellow locker room on [[Gahreesen]]. Finally, the third is the lightest and thinnest, and stands in stark contrast to the first two suits. However, this one does not have Linking books inside the gloves, and uses them outside it instead.


The third E.V. suit is the only one able to be worn by [[explorer]]s visiting the [[Cavern]], and can be donned via a large tube—which may be the same "decontamination module" from the [[Book of D'ni]]—at the end of each locker room when access to the [[Gahreesen Wall|Wall]] is granted to explorers. This suit can only be worn while climbing the Wall; it is stripped from the explorer upon reaching the top of the Wall and linking to the [[Maintainer's Nexus]]. However, the suits can be worn at will through [[Relto]] in [[Uru: Complete Chronicles]].
The third Maintainer suit is the only one able to be worn by [[explorer]]s visiting the [[Cavern]], and can be donned via a large tube—which may be the same "decontamination module" from the [[Book of D'ni]]—at the end of each locker room when access to the [[Gahreesen Wall|Wall]] is granted to explorers. This suit can only be worn while climbing the Wall; it is stripped from the explorer upon reaching the top of the Wall and linking to the [[Maintainer's Nexus]]. However, the suits can be worn at will through [[Relto]] in [[Uru: Complete Chronicles]].


Similar types of protective suits like this are used in real life as "[[w:Hazmat suit|HazMat]]" (Hazardous Materials) suits.
Similar types of protective suits like this are used in real life as "[[w:Hazmat suit|HazMat]]" (Hazardous Materials) suits or "[[w:Environmental suit|environmental suits]]".
 
== Gallery ==
<gallery widths=150px>
File:Bulky Maintainer Suit.jpg|The heavy duty suit
File:Wall Maintainer Suit.png|The Wall training suit
</gallery>


[[Category:D'ni technologies]]
[[Category:D'ni technologies]]
[[Category:Devices]]
[[Category:Devices]]
[[Category:Articles needing cleanup]]
[[Category:Articles needing cleanup]]

Latest revision as of 19:05, 14 December 2020

Maintainer suit
Standard Maintainer Suit.jpg
The standard Maintainer suit
Location unknown

The Maintainer suit was a special suit made from deretheni stone. It was designed to be impervious to anything an Age could potentially throw at the wearer. The suit was jet black, made of overlapping plates of the stone, and had an almost metallic, insect-like appearance.

In older models of the Maintainer suit, tiny, "Stone-bound" Linking Books were encased in the gloves of the suit, one linking to the Age, and another linking back to the linking chamber. They were separated from the wearer's hand by inert membranes. To activate the link, a small vial of gas was discharged into the glove, dissolving the membrane and bringing the person's hand in contact with the linking panel. A timer was placed in the vial for the linking book back to the linking chamber, allowing a time delay before the link back was activated automatically.

Sampling devices were arrayed around the outside of the suit to collect information on the atmosphere and examined it for signs of life. The suit was hermetically sealed in order to prevent any potential contagions or toxins from entering the suit and harming the wearer.

The Guild of Maintainers created 3 designs of Maintainer suits:

The first (sometimes called an "Environmental Verification Suit"[citation needed]) was the heaviest, largest and thickest, designed to withstand extreme environments. The second was the "standard duty" suit. Both can be found in the yellow locker room on Gahreesen. Finally, the third is the lightest and thinnest, and stands in stark contrast to the first two suits. However, this one does not have Linking books inside the gloves, and uses them outside it instead.

The third Maintainer suit is the only one able to be worn by explorers visiting the Cavern, and can be donned via a large tube—which may be the same "decontamination module" from the Book of D'ni—at the end of each locker room when access to the Wall is granted to explorers. This suit can only be worn while climbing the Wall; it is stripped from the explorer upon reaching the top of the Wall and linking to the Maintainer's Nexus. However, the suits can be worn at will through Relto in Uru: Complete Chronicles.

Similar types of protective suits like this are used in real life as "HazMat" (Hazardous Materials) suits or "environmental suits".

Gallery[edit | edit source]